With the arrival of intelligent robot era, the industry gradually began to use intelligent robots to replace human. Like traditional warehouses and factories will spend a lot of manpower to move goods, relatively speaking, efficiency is relatively low, and also prone to mistakes.
The intelligent AGV handling robot is different. As the handling equipment of automatic three-dimensional warehouse, it provides intelligent transportation from products to materials automatically online, offline and halfway, so as to reduce costs and improve the efficiency of handling and sorting.
AGV warehouse handling robot, also known as unmanned carrier. It is equipped with electromagnetic or optical, radar, laser and other automatic guidance devices, which can travel along the prescribed guidance path without human control. It can operate automatically through battery storage. Generally, its path and behavior can be controlled through the dispatching system, or the electromagnetic track can be used to set up its path.
AGV handling robot walking system is composed of control panel, guidance sensor, direction potentiometer, status indicator light, obstacle avoidance sensor, photoelectric control signal sensor, driving unit, guiding magnetic strip and power supply. And this involves a variety of connector applications. The vehicle battery is the power supply device for the motor and transmitter on the car body; The signal collected by the sensor is transmitted to the control unit of the vehicle single chip microcomputer. You need a connector.
The current carrying level and stability of the connector determine the running stability of the AGV transport robot. Amass LC series special connectors for intelligent devices improve current-carrying and conductive performance of connectors in multiple layers to ensure efficient operation of intelligent devices.
The crown spring structure carries the current continuously and stably
The crown spring structure has the advantages of sustained and stable current carrying, reliable contact, earthquake resistance and transient breaking.
As a common form of contact parts for automotive battery connectors, its inserting and pulling force is lighter than that of the cross slotted elastic jack, and inserting and pulling are gentle; Effectively solve the problem of quality instability caused by cross slotted structure defects, more suitable for intelligent equipment special connectors. When inserting, the 12 contacts of the crown spring structure are relative to the 4 contacts of the cross grooving, and the elasticity of inserting is greater, so as to effectively resist the sudden breaking and safely multiply.
Implement vehicle gauge level technical standards of outstanding quality
LC series connectors comply with the technical standards of T/CSAE178-2021 Technical Conditions of High Voltage Connectors for Electric Vehicles 23 project. The product design level is more standardized, reliable and guaranteed.
Post time: Jun-03-2023